The Gardner ATTs Bite Alarms are widely considered to be the best on the market, thanks to their 100% water tight design, excellent build quality, and high-quality electronics.
Each alarm head has a latching LED on the front and all audible indication comes from the compatible V& Deluxe wireless receiver.
Furthermore, each ATT alarm is tuned into an individual channel on the receiver, that lights up, beeps and/or vibrates.
A truly unique ‘silent alarm’ that offers something different to other leading bite alarm makers out there.
1. Gardner ATTs Bite Alarm Features
As an angler, you know that every little detail matters when it comes to your gear.
That’s why you’ll love the Gardner ATTs bite alarms.
These alarms feature a soft touch, non-reflective, rubberized finish for a sleek look. Plus, they have a built-in transmission that is compatible with the V& Receiver and Deluxe Receiver.
And because there are no buttons or knobs, they’re more reliable than ever!
100% watertight, these bite alarms also have a high standard of digital circuitry for total reliability and performance.
Plus, they include an integral Low Battery Warning System and a Betalight Slot on each ear for the dedicated ATTs Tritium Max Betalights.
The ATTs heads use a “Intelligent” Protective Hard Case as Standard that acts as the ON/OFF switch for your ATTs, disabling the battery when fitted.
Just remove the hard case to turn them on!
How simple is that?
So make the switch to Gardner ATTs bite alarms and experience the difference!
You won’t be disappointed!
Revolutionary silent alarm
Built in transmitters
Full wireless remote buzzer-receiver system
Low battery warning
Multi-coloured user-changeable roller wheels
Ultra compact and lightweight
Full 2 year Gardner ATT warranty
Gardner ATTs Battery Change & Maintenance
Gardner ATTx Alarms: How To Change The Wheel
2. Gardner ATTx V2 Wireless Receiver
The ATTx V2 Wireless Receiver is the perfect addition to your bite alarm setup!
The receiver is compatible with all ATTs heads, so you can use it with any ATTs bite alarms you have.
The wireless receiver has a built-in speaker and an LED light, so you can easily hear and see when a fish bites.
The receiver also has a power button, so you can save battery life when you’re not using it.
The ATTx V2 Wireless Receiver is a great way to upgrade your bite alarm setup!
With a whole raft of features, such as the soft touch, non-reflective rubberised finish, means the receiver is easy to hold and doesn’t reflect light.
I found this to be perfect for those early starts and dark evenings!
The adjustable tone control means you can fine-tune the receiver to your own personal preferences, whilst the volume control also lets you adjust the sound so that you can hear it over any background noise.
The ATTx receiver features a 30 second latching LED, showing which alarm has bleeped/triggered – this is especially useful if you have more than one bite alarm on your rod pod, like most of us do.
Pairthis receiver with your Gardner ATTS bite alarms to complete a quality bite indication setup that won’t let you down.
Changing Tones: ATTx Deluxe Receiver
For the tackle tarts amongst you, single colour LED Receivers are also available.
These include: all blue, red, purple, green, yellow and orange.
Finally, the ATTx V2 receivers only require a single AA battery, which makes it easy to replace when it dies – no need for any special tools or equipment here!
This really is a top-of-the-range receiver and perfect for those who demand the best.
I highly recommend it!
Soft Touch, non-reflective, rubberised finish
Improved Battery Life on Receiver
Powered by a single AA Battery
Low Battery Warning (very useful)
The Receiver beeps at the same rate as your alarms
Improved Range and Performance
Multiple Tone Selection on the Receiver
Vibrate mode and Volume control
How To Factory Reset ATTx Deluxe Receiver
3. Gardner ATTs Snag Ears
The Gardner ATTs snag backs feature higher parallel ears to help keep the rod safely in place when fishing locked up in thick weed or too snags.
These replacement backs fit both the original ATTs and the ATTs alarm heads and they negate the need for separate snag ears, offering greater security from your carp rod being dragged out of the buzzer.
To install, simply unscrew the original back plates from your alarms and replace them with these new ones.
The increased height of the ears (from 18mm to 28mm) will provide greater stability, while the two recesses for the glue fit of a pair of Gardner Tritium Max betalights will add an extra level of safety.
If you’re looking for a more secure way to fish with your ATTs bite alarms, give these Gardner snag backs a try!
Higher parallel ears – ear height increased from 18mm to 28mm.
Two recesses for the glue fit of a pair of 6 x 2mm Gardner Tritium Max betalights
Unscrew the original back plates from your alarms and replace them with the Snag Back (replacing the gasket for a perfect seal).
Kit includes: 1 x Snag Back, 1 x Neoprene case (with integral magnet to turn off head), 4 x screws and 1 x gasket seal.
4. Gardner ATTs Protective Hardcase
These replacement cases are available in two sizes, small and large.
The small is designed to fit the original ATTs, while the large will fit the Crystal and Underlit heads.
To find out which size you need, simply measure the head of your alarm.
If it is less than 50mm in diameter, you will need the small case. If it is larger than 50mm, you will need the large case.
If you’re looking to protect your investment and extend the life of your ATTs bite alarms, be sure to pick up a Gardner ATTs Protective Hardcase today.
5. Gardner Tritium-Max Isotopes
The size and high output of Tritium-MAX ATT isotopes make them ideal for mounting on rod tip adaptors to show movement of the rod tip, in large bobbins or indicators to offer the best possible visibility.
Tritium-MAX Betalights are the ultimate continuous light source, providing the maximum possible brightness.
The tritium gas mixture used is sealed into the glass tube under maximum pressure, making these the most powerful isotopes available.
When it comes to ATTs bite alarms, there is no better option than Tritium-MAX isotopes.
Order your set today and be ready for bites even in low-light conditions!
Gardner ATTs Bite Alarms: Final Thoughts
Gardner ATTs Bite Alarms are a great investment for anglers who want a reliable setup.
These alarms are easy to use and can be attached to your banksticks, or connected to your rod pod in seconds.
Both the ‘silent’ function and ease of use makes these one of the most reliable bite alarm setups around.
If you’re looking for a way to up your fishing game, consider investing in a set of Gardner ATTs Bite Alarms.
Like this content?
We would really appreciate it if you could please share it on social media, or Whatsapp it to a friend, or even email a colleague who may be interested.
Some of the links on this page are affiliate links, which means we may receive a modest commission if purchases are made through those links. This adds no cost to our readers and helps us keep our site up and running.
Last update on 2022-05-23 / Affiliate links / Images from Amazon Product Advertising API